Electrical Spec
Mechanical Spec
Converter Connections
LED Indications
Electrical Spec
![]()
Input Parameters
- Voltage Type: 3 phase input
- Voltage Range: 180V AC to 400VAC
- Frequency: 47 – 63Hz
- Power Factor (Typical): > 0.8
Output Parameters
- Output Voltage: 12V DC
- Output Current: 50A
Environmental Parameters
- Working Temperature: -10ºC to 70ºC
- Humidity: 20 – 95% non-condensing
Protection Parameters
- Over Temperature: Temperature measured at heat sink. If Heatsink temperature exceeds 70ºC, device starts to de-rate output power to 80% of rated power. If heatsink temperature exceeds 85ºC, unit shuts down
Mechanical Spec
Converter Connections
Converter View from Front
Input Connections:

Output Connections:

LED Indications
Input Connections:

LED Description:
- LED 1:
Off ⇒ Output current below maximum rating
On ⇒ Power supply over loaded
- LED 2:
Always off
- LED 3:
Off ⇒ Temperature within converter specification
Flashing ⇒ Temperature exceeding 70ºC limiting output power
On ⇒ Over Temperature trip
- LED 4:
Heart beat LED, always flashing
- LED 5:
Off ⇒ No output voltage
On ⇒ Converter outputting voltage to load
